Knick Stratos Pro A2 Oxy Série Guide Rapide page 8

Operating Modes / Functions
Meas. mode
(main display
selectable)
Pressing the menu key (down arrow) opens the selection menu.
Select the menu group using the left/right arrow keys.
Pressing enter opens a menu item. Press meas to return.


Manual activation of HOLD mode, e.g. for sensor replacement.
The signal outputs behave as configured (e.g. last measured value, 21 mA)



(Access via
code, factory
setting:
5555)
8
TAG display
after 60 s
Display of calibration data
Display of sensor data
Self test: RAM, ROM, EEPROM, module
Logbook: 100 events with date and time
Display of direct, uncorrected sensor signals
Display of software version, model designation, serial number
Calibration in water/air (as configured)
Zero adjustment
Product calibration
Adjustment of temperature probe
Configuring parameter set B: See previous page
Configuring parameter set B
Display of measured values for validation (simulators)
Current source, output 1
Current source, output 2
Relay test (A4... only)
Controller: man. specifi cation of controller output (A4... only)
Specifying access codes for operating modes
Reset to factory setting
Enabling an option via TAN
CLK display
after 60 s
A4... only: Controller
parameter display
(if configured)