Connecting Your Tv - Pioneer VSX-C502 Mode D'emploi

03 Connecting your equipment

Connecting your TV

This page shows you how to connect your TV to the
receiver. If your TV has a built-in digital decoder, you can
connect the digital audio output to this receiver to enjoy
Dolby Digital and DTS sound from digital TV broadcasts.
1 Use a SCART cable to connect the DVR/TV IN/OUT
AV connector to an AV connector on your TV.
VSX-C502
12
En
ANTENNA
AM LOOP
FM UNBAL 75Ω
+
DIGITAL IN
–
R L CENTER R L SURROUND
STB DVR/TV DVD
SUB
FRONT SURROUND BACK
SPEAKERS (DVD) (STB)
WOOFER
OUT OPT1 OPT2 COAX
OPTICAL COAXIAL
DIGITAL AUDIO OUT
TV
2 Use an optical digital audio cable to connect the
STB(DVD) OPT1 jack to an optical digital audio
output on your TV.
If your TV doesn't have an optical digital audio out jack, it
is possible to use a coaxial connection to the DVD(STB)
COAX jack. However, since by default this input is
assigned to the DVD input, you will need to reassign it to
the STB input before you can use it. After connecting up
everything else see Optical input setting on page 38 for
how to do this.
OUT
IN
CONTROL
CENTER SURROUND
VIDEO IN/OUT
AV CONNECTOR
L
R
SUB WOOFER
AUDIO IN (5.1CH) DVD IN
AV CONNECTOR OUT
AC IN
DVR/TV IN/OUT
STB IN