Instructions For Maintenance - LaserLiner ThermoCamera Compact Plus Mode D'emploi

21
Software (optional)
With the software provided on the CD it is possible to transfer the recorded data to a PC and to use
the data for further processing and documentation.
Load the CD in the drive and follow the installation routine. After successful installation, start the
application. Connect one end of the supplied USB cable to the mini-USB port of the device and the
other end to a free USB port on your computer. For further information on how to use the software,
refer to the Help function that contains a detailed description of the functions.
!
It is not necessary to install a driver. The software operates under Windows XP / 7 / 8 and 10.
3.
2.
22

Instructions for maintenance

– Perform the task at a location that is clean and free of dust and water
– Switch off the camera, remove the batteray
– Earth to protect from static charges
– Do not touch the lens
– Do not touch the parts inside the thermal camera (sensors)
– Protect both the interior and the lens from dust and contamination
– Warranty expires in the case of improper handling
EU directives and disposal
This device complies with all necessary standards for the free movement of goods
within the EU.
This product is an electric device and must be collected separately for disposal
according to the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at: www.laserliner.com/info
32
GB
1.
Screenshot von
TCV-Software