Measurement Range - LaserLiner ThermoCamera Compact Plus Mode D'emploi

11

Measurement range

Range
-20°C~150°C
0°C~350°C
12
Temperature range manual / automatic
auto man
13
Manual temperature range
28
GB
Range
-20°C~150°C
0°C~350°C
Automatic temperature range
This setting is used to adjust the temperature range of the IR image and
the resulting distribution of the colour spectrum of the infrared image.
The colour spectrum of the measured IR image is determined in relation
to the temperature range and colour scale.
The colour distribution of the IR image is automatically and dynamically
adjusted in the bargraph based on the measured min./max. values.
Manual temperature range
In manual settings mode, the temperature range is no longer set
automatically based on the measured min./max. values but rather
determined on the basis of manual values. Refer to Section 13
The min/max values last measured are taken as the default
!
setting every time the temperature range is switched from
AUTO to Manual.
ok
3 sec
Pre-selection of measurement range:
-20°C ... 150°C
(ideal for interior and exterior)
0°C ... 350°C
(ideal for industrial applications)
14.3
Cancel
14.3
ok Cancel