Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
En
SafEty notES
5
iNTENDED USE OF iNSTRUMENT
The instrument emits a visible laser beam in order to carry out the fol-
lowing measuring tasks (depending on instrument): Setting up heights,
horizontal and vertical planes, right angles and plumbing points.
SPECiFiC REASONS FOR ERRONEOUS MEASURiNG RESULTS
Measurements through glass or plastic windows; dirty laser emitting win-
dows; after instrument has been dropped or hit. Please check accuracy.
Large fluctuation of temperature: if instrument will be used in cold areas
after it has been stored in warm areas (or the other way round) please wait
some minutes before carrying out measurements.
CARE AND CLEANiNG
Handle measuring instruments with care. Clean with soft cloth only after
any use. if necessary damp cloth with some water. if instrument is wet
clean and dry it carefully. Pack it up only if it is perfectly dry. Transport in
original container / case only.
ELECTROMAGNETiC ACCEPTABiLiTy (EMC)
it cannot be completely excluded that this instrument will disturb other ins-
truments (e.g. navigation systems); will be disturbed by other instruments
(e.g. intensive electromagnetic radiation nearby industrial facilities or radio
transmitters).
CE-CONFORMiTy
instrument has CE-mark according to EN 61326:1997 ,
EN 55022, EN 61000-4-2/-3.
11
ECOLINE
Publicité
Table des Matières
