Bosch PLR 30 C Notice Originale page 29

Masquer les pouces Voir aussi pour PLR 30 C:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
OBJ_BUCH-2312-002.book Page 29 Tuesday, November 11, 2014 12:50 PM
The first measured value is shown at the top of the display.
After the second measurement has been completed, the area
will be automatically calculated and displayed. The end result is
29.589 m
shown at the bottom of the display, while the individual meas-
29.589 m
ured values are shown above it.
875.51 m
2
Volume Measurement
For volume measurements, repeatedly press button 2 until the indicator for volume
appears on the display 5.
measurement
Then measure the width, length and height one after the other as with a length meas-
urement.The laser beam remains switched on between the three measurements. The
distance to be measured flashes in the indicator for volume measurement
After the third measurement has been completed, the volume
will be automatically calculated and displayed. The end result is
29.589 m
shown at the bottom of the display, while the individual meas-
29.589 m
ured values are shown above it.
29.589 m
25905.4 m
3
Continuous Measurement (Tracking) (see figure C)
For continuous measurements, the measuring tool can be moved relative to the tar-
get, whereby the measuring value is updated approx. every 0.5 seconds. In this man-
ner, as an example, you can move a certain distance away from a wall, while the actual
distance can always be read.
For continuous measurements, repeatedly press the button 2 until the indicator for
continuous measurement
Press the measuring button 4 to initiate the measuring process.
Move the measuring tool until the desired distance value is
shown in the display below.
27.589 m
min
Pressing the measuring button 4 will interrupt the continuous
29.589 m
max
measurement. The current measured value will be shown at the
28.000 m
bottom of the display. The largest and smallest measured value
appear above it. Pressing the measuring button once more 4
starts the continuous measurement again.
Continuous measurement automatically switches off after 4 mins.
Bosch Power Tools
appears on the display 5.
English | 29
.
2 609 141 213 | (11.11.14)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Plr 40 c

Table des Matières