Mounting And Removal Of The Display; Menu Availability - Univega Xion Mode D'emploi

7.2.1 Mounting and removal of the display

Please always turn the Pedelec of irst before you
remove the display Chapter 7.1.1 "Switching on/of".
In order to protect your Pedelec rom undesir-
¡
able use by third parties or thet, the display
should always be removed rom the handlebar
when the Pedelec is not in use.
You can protect the display rom thet by means
¡
of a self-tapping countersunk screw for plastic.
Contact your specialist cycle shop about this.
Mounting:
Place the display on the display holder at an angle of
approx. 30 degrees.
Using light pressure, turn the display through 30 degrees
in a clockwise direction so that both components are
aligned with one another. In the process, you can clearly
feel the display lock into place. At the same time, ensure
that the display is correctly aligned.
Mounting the display
Removal:
Turn the display approx. 30 degrees anticlockwise on the
display holder. In doing so, the electrical connections are
undone and the display can be removed.
Removing the display

7.2.2 Menu availability

When the "M" is visible on the display, you can carry out
settings in the menu. The "M" is not displayed while you
are riding the Pedelec or while the Pedelec is rolling.
Menu availability
You can also ind information on the assist modes in
Chapter 7.4.2 "Assist mode".
The selected assist level is displayed graphically on the
far let of the display. Above the diamond you will see the
assist levels 1 to 5. The higher the selected assist level,
the more assistance the motor provides with constant
pedal force.
Assist levels
Original User Manual | Xion Pedelec 17