Safety; Proper Use - Fronius MTG 250i Instructions De Service

Safety

Proper use

The MIG/MAG manual welding torch is intended solely for MIG/MAG welding in manual ap-
plications.
Any use above and beyond this purpose is deemed improper. The manufacturer shall not
be held liable for any damage arising from such usage.
Proper use includes:
-
-
Safety
Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
► All the work and functions described in this document must only be carried out by
► Read and understand this document.
► Read and understand all the Operating Instructions for the system components, espe-
Danger from electric current and risk of injury from the emerging wire electrode.
This can result in serious injury and damage to property.
► Turn the power source mains switch to the "O" position.
► Disconnect the power source from the mains.
► Ensure that the power source remains disconnected from the mains until all work has
Danger from electric current.
This can result in serious injury and damage to property.
► All cables, lines and hosepacks must be properly connected, undamaged, correctly in-
Risk of burns from hot welding torch components and hot coolant.
This can result in severe scalds.
► Before commencing any of the work described in these Operating Instructions, allow
Carefully reading and following all the instructions given in the operating instructions
Performing all stipulated inspection and maintenance work.
WARNING!
trained and qualified personnel.
cially the safety rules.
WARNING!
been completed.
WARNING!
sulated and adequately dimensioned at all times.
CAUTION!
all welding torch components and the coolant to cool to room temperature (+25 °C, +77
°F).
33