Unit Description - BoomToneDJ Slim PAR 18tri3 Mode D'emploi

2- Unit Description

Button:
1. ① M ENU
layer menu
2. ② UP
parameters
3. ③ DOW N
parameters
4. ④ ENTER
5. ⑤Signal indicator light
In DMX or SLAVE mode, the Signal indicator light flashing when signals are
detected
Note:
(1)In ten seconds, if no buttons to press, the LED display will be off. Press any button
to turn the display on again.
(2)After pressing a button, all the parameters will save automatically after 2 seconds .
(3)No matter the item is in which program in which mode, once detecting DMX or
SLAVE signal, the program will jump into DMX or SLAVE mode automatically.
Then,if DMX/SLAVE signal off, the program will return to the original mode .
To go forward in the selected functions or go back the last
To go forward in the selected functions
To go backward in the selected functions or reduce
To go into the next layer menu
or increase
14