B. By universal DMX controller
Using universal DMX controller to control the units, you have to set DMX address from 1 to 512
channel so that the units can receive DMX signal.
Press the MENU ,then find Addr ,press ENTER,when the 1 is showing on the display. Pressing
ENTER . Use DOWN and UP button change the DMX512 address. Once the address has been
selected, press ENTER button and then Press and Keep MENU button or storing automatically 8
seconds later. To go back to the functions without any change press the MENU button again.
3 channels Mode:
Channel
CH1
CH2
CH3
5 channels Mode:
Channel
CH1
CH2
CH3
CH4
CH5
Value
0-255
0-255
0-255
Value
0-255
RED dimmer
0-255
GREEN dimmer
0-255
BLUE dimmer
0-255
Master dimmer
0-6
Dimmer mode
7-65
Slow to fast strobe
66-69
None
70-128
Pulse strobe from slow to fast
129-132
None
133-191
Strobe fading in from slow to fast
192-195
None
196-255
Strobe fading out from slow to fast
Function
RED dimmer
GREEN dimmer
BLUE dimmer
Function
18