Programming The Remote For Tv Operation (Sony Tv Only); (Input Sync) - Sony RHT-G1000 Mode D'emploi

Controlling the connected components
Programming the remote
for TV operation (Sony TV
only)

(Input SYNC)

If you connect a Sony TV, follow the steps below
to program the remote. The TV input will be
selected automatically (Input SYNC).
CLEAR
m M
H
1
Press the input button for the
component you want to change while
holding down RM SETUP.
The indicator lights up.
Note
• Press the RM SETUP button using a pointed
object.
2
See the table below for the remote
button corresponding to the TV input
jack you have connected to, and press
the button.
TV input jack*
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
VIDEO 5
VIDEO 6
VIDEO 7
VIDEO 8
10
US
RM SETUP
Input buttons
Numeric
buttons, etc.
-
ENTER
ENTER
. >
X x
Remote Button
1
2
3
4
5
6
7
8
TV input jack*
COMPONENT 1
COMPONENT 2
COMPONENT 3
COMPONENT 4
* TV input jack name may differ depending on
your TV model.
3
Press ENTER.
The indicator slowly flashes twice and the
remote automatically exits the
programming mode.
To disable this function
Press ENTER while holding down 0 in step 2.
The TV input will not be selected automatically
even if you press the input buttons.
Remote Button
9
AUDIO
SUBTITLE
ANGLE