Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Maintenance
Changing
the battery
If the optional opening
of the detector is
not locked (see Fixing)
Œ
Remove the detector from
its base by turning it counter
clockwise until you hear a
G
click.
B
Replace the worn battery.
Ž
Lock the detector back
onto
its
base
Mounting).
Carry out a test (see sec-
tion detector tests).
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type (BatLi 26 or BatLi 25, 3,6 V).
Please dispose of the old Lithium battery in a container for this purpose.
If the optional opening
of the detector is
locked (see Fixing)
Œ
Insert a flat blade screw-
driver into this notch.
Remove the detector from
its base by turning it counter
clockwise until you hear a
click.
Ž
Replace the worn battery.
Lock the detector back
onto
its
(see
Mounting).
Make a test (see section
detector tests).
In case of any
works in the room
Painting the detector is
prohibited.
Protect the detector by cov-
ering it fully with the plastic
cover supplied.
base
(see
42
Cover the detector
with the plastic
cover prior to carrying out
any work in the room after
detector's installation.
Li
Publicité
Chapitres
Table des Matières
