Operation Principle - hager S151-22X Guide D'installation

Masquer les pouces Voir aussi pour S151-22X:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Summary
Introduction ................. 32

Operation principle ...............32

Description............................33
Power supply................33
Programming................34
Fixing ....................................36
in a network ..........................37
Detector tests ...............38
of the detector ..............39
Indication ......................40
Alerts.....................................40
Faults ....................................40
Maintenance .................41
Servicing the detection
head ......................................41
Changing the battery............42
in the room............................42
User sheet.....................43
Technical data ..............45
Introduction
Operation principle
The optical smoke detector is especially suited for detecting
slow-starting fires that may smoulder for several hours before
breaking out. It is designed to protect the private areas of
buildings or apartment blocks and mobile homes.
It can be:
used as a stand-alone unit,
q
integrated into a Hager alarm system with TwinBand
q
trol panels,
inter-connected in a wired network of up to 40 detectors.
q
In stand-alone mode, it produces the following alarms and
indications throughout the smoke detection period:
Red signal LED
indicates the state
of the detector
Detector transmit-
the LED flashes
ting the smoke
detection signal
Other wired
inter-connected
detectors
Connected to a Hager alarm system it also activates imme-
diately smoke is detected:
triggering of the control panel siren and the alarm sirens in
q
fire alarm modulation for 5 minutes,
triggering of the telephone dialler,
q
triggering wired sirens.
q
It is recommended to replace the smoke detector
subject to a regular and normal maintenance
every 10 years. The replacement date is indicated
on back of the product.
32
White
indicator
LED
lit
quickly
-
lit
®
con-
Built-in audible alarm
a built-in alarm sounds
on a continuous basis
(85 dB(A) at 3 m)
a modulated built-in
audible alarm sounds
(85 dB(A) at 3 m)

Publicité

Table des Matières
loading

Table des Matières