User Sheet - hager S151-22X Guide D'installation

User sheet

(pull-out sheet for the user)
Be prepared
for a fire
Plan an evacuation route.
q
Prepare an evacuation
q
plan for every bedroom.
The least smoke is near
q
the ground: crawl out of the
house.
When the alarm rings,
q
wake up everyone.
Prearrange an assembly
q
point outside the house.
Avoid going into the house
q
unnecessarily if there is a fire.
Call the fire brigade.
q
In case of any
works in the room
Painting the detector is pro-
hibited. Protect the detector
by covering it fully with the
plastic cover supplied.
Cover the detector with the
plastic cover prior to carrying
out any work in the room
after detector's installation.
Summary of your detector's responses
and indications
Normal operation
Red signal LED
indicates the state
of the detector
the unit flashes once
All your detectors
Smoke detection (1)
Red signal LED
indicates the state
of the detector
Detector transmit-
the LED flashes
ting the smoke
detection signal
Other wired
inter-connected
detectors
(1) The detector response lasts until the smoke has dissipated.
Detector tests (2)
Red signal LED
indicates the state
of the detector
Detector
the LED flashes
transmitting
the test signal
Other wired
the LED flashes
inter-connected
detectors
(2) The detector(s) respond until test button is pressed and held pressed
for longer than 10 sec. and then released.
43
White
indicator
LED
-
every 10 sec.
White
indicator
LED
lit
quickly
- lit
White
indicator
LED
lit
quickly
lit
quickly
Built-in audible alarm
-
Built-in audible alarm
a built-in alarm sounds
on a continuous basis
(85 dB(A) at 3m)
a modulated built-in
audible alarm sounds
(85 dB(A) at 3m)
Built-in audible alarm
the alarms rings
for 1 sec (75 dB (A)
at a 3 m distance),
then stops for 1 sec.
the alarms rings
for 1 sec (75 dB (A)
at a 3 m distance),
then stops for 2 sec.
G
B