Changing The Battery; In Case Of Any Works In The Room - hager S151-22X Guide D'installation

8.2 Changing
the battery
if the optional opening of
the detector is not locked
(see Fixing)
1. Remove the detector from
its base by turning it
counter clockwise until
you hear a click.
2. Replace the worn battery.
3. Lock the detector back
onto its base (see
Mounting).
4. Make a test (see section
detector tests).
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type (BatLi 26 or BatLi 25, 3,6 V).
Please dispose of the old Lithium battery in a container for this purpose.
if the optional opening of
the detector is locked
(see Fixing)
1. Insert a flat blade
screwdriver into this notch.
2. Remove the detector from
its base by turning it
counter clockwise until
you hear a click.
3. Replace the worn battery.
4. Lock the detector back
onto its base (see
Mounting).
5. Make a test (see section
detector tests).
47
8.3 in case of any works
in the room
Painting the detector is
prohibited.
Protect the detector by
covering it fully with the
plastic cover supplied.
CAution: cover the
detector with the plastic
cover prior to carrying out
any work in the room after
detector's installation.
GB
Li