Changing Over Door Hinges - Franke FCT 4101 N XS Mode D'emploi

Changing over door hinges

• Remove cover .
1
• Unscrew hinge bracket
2
• Transfer cover plate to the opposite side.
4
• Transfer hinge components
opposite side.
• Pull middle hinge pin out from underneath. Remove upper
bt
door.
• Transfer plug .
bn
• Unscrew hinge bracket
5
• Transfer cover to the opposite side.
6
• Turn hinge bracket through 180° and screw into place.
5
• Remove mounting point
bu
• Remove cover .
7
• Unscrew hinge bracket
8
• Transfer pin on hinge bracket
9
• Transfer angle and cover
bl
• Screw on hinge bracket
8
the appliance. Screw M4 must be screwed into the
left-hand hole on the hinge bracket. The other two
screws are M5 screws.
• Replace cover .
7
• Suspend upper door on hinge pin
• Slide middle hinge pin
bt
through the hinge .
5
• Suspend lower door on hinge pin
• Insert hinge bracket in lower door mounting and screw into
2
place.
• Click cover into place.
1
• Lever out pressure plates
• Transfer door handles and plugs
bp
• Attach pressure plates
bo
. Remove lower door.
on the hinge bracket
3 2
.
and insert from top.
.
to the opposite side.
8
to the opposite side.
bm
on the left-hand side of
and close.
9
into the door mounting from below
and close.
5
at the front and slide away.
bo
to the other side.
bq
.
to the
GB
13