Displaying Stored Results; Deleting Measurements From The Memory - Gima KN-520 Manuel De L'utilisateur

27
d. If you want to measure again, just press the "Start" button.
e. after measurement, the monitor will turn off automatically after 2 minutes
of no operation. alternatively, you can press the "
monitor manually.
f. During measurement, you can press the "
monitor manually.
Note: please consult a health care professional for interpretation of pressure
measurements.

6. displaying stored results

a. after power on by press the "
will be displayed. press "m" button repeatedly to review the results
measured previously.
b. When displaying the stored results, the monitor will turn off automatically
after 2 minutes of no operation. You can also press the button "
to turn off the monitor manually.

7. deleting measurements from the memory

to delete a stored result, press "m" button until the desired result is
displayed. When desired result is displayed on screen, hold down "m"
for 3 seconds. the display will now show "dL" until you release the button.
once button is released, that result will be deleted.
ENGLISH
" button to turn off the
" button, press "m" button, the last result
" button to turn off the
"