Indel B K BASIC Série Mode D'emploi page 37

K BASIC - K SMART - K ECOSMART
APPLYING THE DRAFT
The draft is a device - consisting of two parts, A and B - which connects the door of the Minibar to the
door of the piece of furniture it is fitted into, both when opening and when closing.
To install the draft, proceed as follows:
- screw the part A on to the door of the Minibar;
- open the door of the Minibar by 90°;
- screw the part B, perfectly horizontal, to the inside of the leaf of the piece of furniture, and fit it into the
part A so it can work as a sliding guide.
9
30
45
45
A
189A0032
K BASIC-K SMART-K ECOSMART_20-11-2017
150
B
20
27,5
Warning!
To ensure a correct closing of the Minibar door, make sure that
the distance between the inner part of the unit door and the
A
outside part of the refrigerator door does not exceed 9 mm.
189A0482
5
ENGLISH
B
35