Remote Control - Fluval Flex 34 L-9 US Gal Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Remote Control

• Remove plastic cover from wireless remote; remove the clear plastic tab located at the bottom of the
remote to activate the battery connection (the remote should already have the battery included).
• Ensure there is a direct line-of-sight between the fixtures sensor (located at top of cover) and the
remote control.
To operate:
• Point the remote so that the infrared sensor on the remote activates the sensor on the cover.
To change the battery:
• Battery compartment is located on back of remote, to open:
• Slide "Release" tab to the right while gently pulling out the battery door.
• Insert (1) 3V battery
• Gently push battery door closed.
Remote Control Keypad Functions
a) Power: Press these buttons to turn LED on
or off
b) Brightness (+ / - ): Repeatedly press these
buttons to increase or decrease desired light
intensity
c) R/G/B LED color: Press any of these
buttons to add or remove red, green, blue
and to adjust the their color intensity
d) Moon/Cloud Cover: Press this button for
fading cloud cover
e) Storm effects: Press this button to mimic
storms with lightning effect
f) All color spectral cycle: Setting slowly
cycles through color spectrum
Maintaining your Aquarium
NOTE: To ensure the well-being of aquarium
inhabitants, it is essential to maintain your
aquarium. At the very minimum, remove 20% of the
water once a week and replace with tap water that
is of similar temperature to your tank and treated
with the correct dose of Fluval Water Conditioner.
(Sold separately)
NOTE: Regular replacement of Fluval filter media
is essential to ensure optimum performance.
The filter media should be changed alternately in
order to maintain continuous biological activity. To
enhance bacterial action, pour a dose of Fluval
Biological Enhancer onto your filter inserts each
time you change the media.
(Sold separately)
MEDIA
Foam Filter Block
Activated Carbon
insert
BIOMAX insert
PURPOSE
Mechanical Filtration:
Traps particles and debris
Chemical Filtration:
Eliminates toxic impurities,
odors and discoloration
Biological Filtration:
Provides Optimum
Biological Balance
RGB
RGB
b
R
G
c
fluvalaquatics.com
Motor Cleaning
For best results, clean impeller and impeller well, every
three (3) to six (6) months
MAINTENANCE
Rinse every
4-6 weeks
N/A
Rinse every
6-8 weeks
a
RGB
W
B
b
d
e
f
REPLACEMENT
12 months
2 to 4 Weeks
2-3 months

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Flex 57 l-15 us gal

Table des Matières