Cleaning and storage
ATTENTION!
❐ Prior to each cleaning, pull the plug out of the socket.
❐ Never submerge the motor unit in water or other liquids.
❐ Not suitable for the dishwasher.
❐ Be careful when handling the inserts and the blade head; the blades and edges are
sharp!
❐ When cleaning, do not use any scouring or abrasive cleaners. They could damage
the surface.
1. Turn the device off and pull the mains plug out of the socket.
2. Disassemble the device in reverse order:
Mincer adapter:
– Loosen the fi xing nut.
– Remove the inserts used (perforated disc, kebbe insert, sausage nozzle, etc.).
– Remove the blade head.
– Remove the conveyor spiral.
– Remove the mincer adapter by pushing down the release button and turning the
adapter to the right (towards the RÜCKWÄRTS / AUS / AN (Reverse / Off / On) but-
ton).
Vegetable cutting adapter:
– Remove the cutting inserts used (coarse/fi ne rasper, slicer) by pulling them out of
the vegetable cutting adapter.
– Remove the vegetable cutting adapter by pushing down the release button and
turning the adapter to the right (towards the RÜCKWÄRTS / AUS / AN (Rever-
se / Off / On) button).
3. Remove any food residue and clean all parts (except for the motor base!) with warm
water and a mild detergent. Then dry all parts thoroughly.
4. If necessary, clean the motor base with a damp cloth.
5. Store the device and accessories in a clean, dry area that is not accessible to child-
ren and animals.
08612_DE-GB-FR-NL_V3.indb 30
08612_DE-GB-FR-NL_V3.indb 30
30
04.11.2014 12:06:10
04.11.2014 12:06:10