Linea 2000 DOMO DO926BFK Mode D'emploi page 59

osite side.
n of the plastic tube and
p of the lower door.
r block, screw and plastic
ower door and move
osite side. You may
he door block to fit the
5. Retire los pernos inferiores, la bisagra y la pata de ajuste en la parte inferior del aparato.
Retire la pata de ajuste del otro lado de la parte inferior y llévela hasta la posición
correspondiente en el lado opuesto de la parte inferior.
6. Fije los pernos, la abrazadera de la bisagra y la pata de ajuste al otro lado de la parte
inferior.
wer screws and lower
unit bottom. Reverse the
ove and secure it with
place, inserting it onto the
ATION
e the lower screws and lower
rom the unit bottom. Reverse the
inge, move and secure it with
wer screws to the opposite side of
t bottom. Carefully set the lower
ack into place, inserting it onto the
inge.
7. Coloque la puerta inferior en su lugar con cuidado. Asegúrese de que la puerta está
ddle hinge. Screw the
alineada tanto horizontal como verticalmente, de manera que las juntas estén cerradas
nto the opposite side of
por todos los lados antes de unir completamente la bisagra central. Vuelva a colocar la
bisagra y atorníllela.
lower door is aligned
and vertically, so that
e the middle hinge. Screw the
e closed on all sides hinge onto the opposite side of
t.
ly tightening the hinge.
ure the lower door is aligned
izontally and vertically, so that
e upper door back into
seals are closed on all sides
ore finally tightening the hinge.
in onto the middle hinge.
8. Coloque la puerta superior. Coloque las bisagras de la puerta superior, atornille y vuelva a
r hinge and screw it
colocar la chapita.
ly set the upper door back into
p of the unit.
nserting in onto the middle hinge.
he upper hinge and screw it
upper door is aligned
to the top of the unit.
and vertically, so that
e closed on all sides
ure the upper door is aligned
www.domo-elektro.be
ly tightening the hinge.
izontally and vertically, so that
Middle hinge
Middle hinge
1/2/16 10:43 am
DO926BFK
59