A layer of frost in the freezer will impair refrigeration of the frozen food and increases power
consumption. Remove the layer of frost regularly. Do not scrape off frost or ice with a knife or
pointed object. Doing this may damage the refrigerant tubes.
1.
Remove the frozen food and place temporarily in a cool location.
2.
Disconnect the appliance from the mains socket.
3.
To accelerate the defrosting process, place a pan of hot water on a stand in the freezer.
4.
Wipe up condensation with a cloth or sponge.
5.
Wipe dry the freezer compartment.
6.
Plug in the appliance and adjust the temperature control knob as desired.
7.
Put the frozen food back in the freezer.
TROUBLE SHOOTING
Frequently, a problem is minor and a service call may not be necessary, use this trouble
shooting guide for a possible solution.
Does not work
· Check connection of power cord to power source.
· Plug in unit
· Use proper voltage.
Cools too frequently
· Check temperature setting and adjust as needed.
· Close door securely.
· Be sure that food is cool before inserting.
· Do not keep door open for too long and MINIMIZE door openings.
· Do not place unit close to heat sources Or direct sunlight.
Intemal temperature not cold enough
· Check connection of power cord to Power source.
· Plug in unit
· Check setting and adjust as needed.
· Close door securely.
· Be sure that food is cool before inserting.
· Do not keep door open for too long and MINMIZE, door openings.
· Allow room for airto circulate around unit..
· Use proper voltage.
48
DO926BFK