Linea 2000 DOMO DO926BFK Mode D'emploi page 46

pper door and move
osite side. You may
he door block to fit the
door off and place it on a soft surface to prevent scratching.
dle hinge by removing
he lower door and place
urface to prevent it from
dle hinge by removing
ws' covers and place
he lower door and place
osite side.
urface to prevent it from
on of the plastic tube and
4. On the top of the door, there is a Teflon bush to guide the hinge and a cover plug. Move
p of the lower door.
this to the other side.
ws' covers and place
On the bottom of the door there is a door stop and a Teflon bush to guide the hinge.
r block, screw and plastic
osite side.
Move this to the other side.
ower door and move
n of the plastic tube and
osite side. You may
p of the lower door.
the door block to fit the
r block, screw and plastic
ower door and move
osite side. You may
he door block to fit the
5. Remove the lower screws, hinge and the adjustable foot from the base of the appliance.
Remove the adjustable foot from the other side of the base and move it to the same
position on the opposite side of the base.
6. Fasten the screws, hinge bracket and the adjustable foot to the other side of the base.
wer screws and lower
unit bottom. Reverse the
ove and secure it with
place, inserting it onto the
7. Carefully replace the bottom part of the door into position. Make sure that the door is
ddle hinge. Screw the
aligned horizontally as well as vertically so that the seal is closed on all sides before you
nto the opposite side of
tighten the centre hinge completely. Return the hinge to its positions and fasten it.
46
lower door is aligned
DO926BFK
and vertically, so that
Middle hinge
unscrew
unscrew
1/2/16 10:43 am
1/2/16 10:43 am