Linea 2000 DOMO DO926BFK Mode D'emploi page 22

the unit flat as this may damage the coolant system.
ips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
e the unit during assembly.
t to have the door swing reversed, we recommend that you contact a
mend that 2 people handle the unit during assembly.
echnician. You should only try to reverse the door yourself if you believe
unit is unplugged and empty.
eversed, we recommend that you contact a t to have the door swing reversed, we recommend that you contact a
e qualified to do so.
moved must be saved to do the reinstallation of the door.
echnician. You should only try to reverse the door yourself if you believe
outils ne sont pas fournis).
try to reverse the door yourself if you believe
e qualified to do so.
the unit flat as this may damage the coolant system.
mend that 2 people handle the unit during assembly.
1. Enlevez la cache de protection des vis. Enlevez les vis ainsi que la charnière supérieure
ge cover.
to have the door swing reversed, we recommend that you contact a
qui maintient la porte en place. Soulevez la porte et posez-la sur une surface douce, afin
ge cover. chnician. You should only try to reverse the door yourself if you believe
d'éviter de la griffer.
e qualified to do so.
e cover.
inge. Lift the
on a padded
upper hinge. Lift the
m scratching.
place it on a padded
2. Sur la partie inférieure de la porte se trouvent un arrêt de porte et une bague en téflon
upper hinge. Lift the
nt it from scratching.
qui guide la charnière. Déplacez-les de l'autre côté.
place it on a padded
screw and plastic
r block, screw and plastic
nt it from scratching.
oor and move upper door and move
r block, screw and plastic
osite side. You may
upper hinge. Lift the
upper door and move
de. You may
the door block to fit the
place it on a padded
osite side. You may
r block to fit the
nt it from scratching.
the door block to fit the
r block, screw and plastic
pper door and move
osite side. You may
3. Retirez les boulons, la charnière et les bouchons de protection centraux. Placez-les de
he door block to fit the
dle hinge by removing
l'autre côté. Soulevez la porte et posez-la sur une surface douce, afin d'éviter de la griffer.
he lower door and place
dle hinge by removing
urface to prevent it from
he lower door and place
urface to prevent it from
e by removing
ws' covers and place
osite side.
r door and place
dle hinge by removing
ws' covers and place
on of the plastic tube and
he lower door and place
osite side.
o prevent it from
p of the lower door.
urface to prevent it from
on of the plastic tube and
4. Sur la partie supérieure de la porte se trouvent une bague en téflon qui guide la charnière
r block, screw and plastic
p of the lower door.
et un bouchon de protection. Déplacez-les de l'autre côté.
ws' covers and place ower door and move
Sur la partie inférieure de la porte se trouvent un arrêt de porte et une bague en téflon
ers and place r block, screw and plastic
osite side. You may
osite side.
qui guide la charnière. Déplacez-les de l'autre côté.
ower door and move
the door block to fit the
n of the plastic tube and
osite side. You may
p of the lower door. the door block to fit the
r block, screw and plastic
lower door.
ower door and move
osite side. You may
screw and plastic
he door block to fit the
or and move
22
DO926BFK
unscrew
unscrew
unscrew
1/2/16 10:43 am
unscrew