Safety Instructions - Mafell FM 800 Traduction De La Notice D'emploi Originale

- Breakage of the rotating tool.
- Breakage of the tools and risk of the tools or parts of them being hurled away.
- Touching live parts with the housing open and the mains plug not removed.
- Hearing can be impaired when working for long periods without ear protectors.
- Emission of hazardous or potentially explosive dusts (all types) during longer lasting operation without
extraction. Please note the safety data sheet of the material to be machined.
3

Safety instructions

General instructions:
- Children and adolescents must not operate this machine. This rule does not apply to young persons
receiving training and being supervised by an expert.
- Never work without the guards of the portal system into which the power tool is inserted and that are
prescribed for each operation. Do not make any changes to the portal system and the milling motor that
could compromise safety.
- Damaged cables or plugs must be immediately replaced. Replacement may only be carried out by Mafell or
an authorised MAFELL service workshop in order to avoid safety hazards.
- Avoid sharp bends in the cable. Do not wind the cable around the milling motor especially when transporting
and storing the milling motor.
- The use of the power tool with water or conductive liquids is prohibited.
- We exclude the use as hand-guided milling motor.
- Keep the milling motor away from rain or moisture. The penetration of water into the milling motor increases
the risk of electric shock.
Do not use:
- Damaged tools or tools that have changed their shape.
- Blunt tools due to the excessive motor load.
- Tools that are not suitable for the milling motor speed during idling.
Instructions on the use of personal protective equipment:
- Always wear ear protectors during work.
- Always where a dust mark during work.
- Always wear protective goggles during work.
Instructions on operation:
- Do not reach with your hands into the danger zone of the tool.
- Examine the workpiece for foreign objects.
- Monitor the speed. If an uncontrolled speed increase or speed jump occurs, the power supply must be
switched off immediately.
Danger
Always observe the following safety instructions and the safety regulations applicable
in the respective country of use!
-25-