Safety Devices; Use According To Intended Purpose; Residual Risks; Safety Instructions - Mafell DDF 40 Traduction De La Notice D'emploi Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
2 carbide-tipped dowel drill bits ø 6 mm (0.24 in.)
2 carbide-tipped dowel drill bits ø 8 mm (0.31 in.)
Further scope of delivery DDF 40 MaxiMAX:
1 package wooden dowels ø 6x30 mm (approx. 350
pcs.)
1 package wooden dowels ø 8x30 mm (approx. 200
pcs.)
1 additional support plate ZA
1 additional stop set ZAG
1 hose connector
1 lateral stop set SA 320
1 trim stop LA
1 position indicator PAZ
1 Allen key with handle
1 bottle of glue
1 dowel nozzle ø 8 mm (0.31 in.)
2 anti-slip mats
1 carrying case
1 operating manual
1 folder "Safety instructions"

2.6 Safety devices

Danger
These devices are required for the
machine's safe operation and may
not be removed or rendered
inoperative.
The machine is equipped with the following safety
devices:
- Switch interlock during tool change
- Protection against contact with the drill bits
- Large bearing surfaces of the base plate and tilting
stop
- Handles and handle recesses

2.7 Use according to intended purpose

The duo-dowel system is exclusively designed for
drilling wooden materials using the drill bits approved
by us with a diameter between 3 mm and 12.2 mm
(0.13 and 4.80 in.).
Any other use than described above is not
permissible. The manufacturer cannot be held liable
for any damage arising from such other use.
In order to use the machine as intended, comply with
the operating, maintenance, and repair instructions
specified by Mafell.

2.8 Residual risks

Danger
Even if used in accordance with its
intended purpose and despite
conforming with the safety
instructions, residual risks caused
by the intended use will always
remain.
- Touching the drill bits inside and outside the base
plate.
- Touching the drill bits on the workpiece rear when
drilling.
- Breakage of the drill bits and risk of the drill bits or
parts of them being hurled away.
- Ejection of chips.
- Touching live parts with the housing open and the
mains plug not removed.
- Hearing can be impaired when working for long
periods without ear protectors.
- Emission of harmful wood dusts during longer
operation without extraction.
3

Safety instructions

Danger
Always observe the following safety
instructions and the safety
regulations applicable in the
respective country of use!
General instructions:
- Children and adolescents must not operate this
machine. This rule does not apply to young
persons receiving training and being supervised by
an expert.
- Never work without the protection devices
prescribed for the respective operating sequence
and do not make any changes to the machine that
could impair safety.
-22-

Publicité

Table des Matières
loading

Table des Matières