Sound Adjustment - Panasonic Technics Grand Class SU-G30 Manuel D'utilisation

Settings
Sound adjustment, Other settings
Firmware updates
"F/W Update"
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve
the way a feature operates. These updates are
available free of charge.
• For the update information, refer to the
following website.
www.technics.com/support/firmware/
Downloading takes approx. 10 minutes.
Do not disconnect the AC power supply
cord or turn this unit to standby while
updating.
• The progress is displayed as "Updating
while updating. (
Note
• During the update process, no other operations
can be performed.
• If there are no updates, "Firmware is Up To
Date" is displayed. (No need to update it.)
• Updating the firmware may reset the settings.
Update via Internet
■
Preparation
• Connect this unit to the network. ( 18)
- Make sure that the network is connected to
the Internet.
1 Press [SETUP].
2 Press [ ], [ ] repeatedly to select
"F/W Update" and then press [OK].
3 Press [ ], [ ] to select "Internet" and
then press [OK].
4 Press [ ], [ ] to select "Yes" and then
press [OK].
• The progress is displayed as "Updating
while updating. (
• When the update has finished successfully,
"Success" is displayed.
5 Disconnect the AC power supply cord
and reconnect it after 3 minutes.
Note
• Downloading may take longer or may not
work properly depending on the connection
environment.
40
(40)
%"
stands for a number.)
%"
stands for a number.)
(Continued)
Update via USB flash memory
■
Preparation
• Download the latest firmware on the USB flash
memory. For details, refer to the following
website.
www.technics.com/support/firmware/
1 Connect the USB flash memory with
new firmware.
2 Press [SETUP].
3 Press [ ], [ ] repeatedly to select
"F/W Update" and then press [OK].
4 Press [ ], [ ] to select "USB" and then
press [OK].
5 Press [ ], [ ] to select "Yes" and then
press [OK].
• The progress is displayed as "Updating
while updating. (
• When the update has finished successfully,
"Success" is displayed.
6 Disconnect the AC power supply cord
and reconnect it after 3 minutes.
Note
• Downloading may take longer depending on
the USB flash memory.

Sound adjustment

The following sound effects can be added to the
audio output.
Listening to more natural-sounding audio
(Re-master)
Re-mastering expands the playback band and
achieves a higher bit depth to reproduce natural
and expansive sound close to original music.
• The factory default is "Off".
Press [RE-MASTER] to select "On"/"Off".
Direct mode
When this mode is set to on, the audio signal
is output directly without performing various
processing circuits.
• The factory default is "Off".
Press [DIRECT] to select "On"/"Off".
%"
stands for a number.)