Panasonic Technics Grand Class SU-G30 Manuel D'utilisation page 34

Operations
Using digital audio output device
You can input digital audio signals to this unit and play
back music.
CD player, etc.
Using coaxial digital cable
1 Disconnect the AC power supply cord.
2 Connect this unit and a CD player etc.
3 Connect the AC power supply cord to
this unit. ( 17)
4 Press [ ] to turn this unit on.
5 Press [DIGITAL] repeatedly to select
"COAX1" or "COAX2".
• You can also select the input source by
turning the input selector knob on the unit.
6 Start playback on the connected
device.
Note
• The digital audio input terminals of this unit can
only detect linear PCM signals. For details, refer
to the operating instructions of the device.
- Sampling frequency:
Coaxial digital input
32/44.1/48/88.2/96/176.4/192 kHz
Optical digital input
32/44.1/48/88.2/96 kHz
- Number of quantization bits:
16/24 bit
34
(34)
PHONO
PHONO
EARTH
Optical digital audio cable
(not supplied)
Coaxial digital cable
(not supplied)
Using optical digital audio cable
1 Disconnect the AC power supply cord.
2 Connect this unit and a CD player etc.
3 Connect the AC power supply cord to
this unit. ( 17)
4 Press [ ] to turn this unit on.
5 Press [DIGITAL] repeatedly to select
"OPT".
• You can also select the input source by
turning the input selector knob on the unit.
6 Start playback on the connected
device.
LINE IN
LAN
OPT COAX1 COAX2 PC
10BASE-T /
DIGITAL IN 100BASE-TX