Settings
Sound adjustment, Other settings
The sound effects and other settings can be set up.
1 Press [SETUP].
2 Press [ ], [ ] repeatedly to
select the menu and then
press [OK].
3 Press [ ], [ ], [ ], [ ] to set,
and press [OK].
Language setting
"Language"
Select "English" or "Français" for the display.
• The factory default is "English".
Adjusting Bass/Middle/Treble
"Tone Control"
You can adjust the tone of this unit. Each tonal
range (Bass/Middle/Treble) can be adjusted.
• To enable this function, select "On
(adjustment)".
• Each level can be adjusted between "- 10" and
"+ 10".
• "TONE" is displayed after setting.
Sleep timer
"SLEEP"
The sleep timer can turn the unit to standby
mode after a set time. (30 minutes/60
minutes/90 minutes/120 minutes/Off)
38
(38)
Auto off function
"AUTO OFF"
This unit is designed to conserve its power
consumption and save energy. The unit has been
left unused for about 20 minutes and will enter
standby mode within a minute. Press any button
to cancel it.
• The factory default is "Off".
Note
• The auto off function works unless you turn it
off, even if you turn this unit to standby mode
and on.