Panasonic Technics Grand Class SU-G30 Manuel D'utilisation page 17

AC IN 〜
KERS /
ARLEURS
16Ω)
Wiring
AC power supply cord connection
Connect only after all other connections are
completed.
• Wireless LAN (Wi-Fi
this unit is turned on. If you stop the Wi-Fi
setting, select "Off" in "Wi-Fi Setup" screen.
Select "On" to keep the Wi-Fi setting. ( 19)
Note
• This unit consumes a small amount of AC power
( 49) even when the unit is in standby mode.
Remove the plug from the main electrical outlet
if you will not be using the unit for an extended
period of time. Place the unit so the plug can be
easily removed.
Insert the AC power supply cord
up to a point just before the
round hole.
AC power supply cord (supplied)
Speaker cable (not supplied)
) setting may start when
®
To a household
AC outlet
Output correction function (LAPC)
You can make the optimum adjustment
according to your own speakers.
• When you select "Off" in "Wi-Fi Setup", you
can set LAPC function ( 41).
• When you select "On" in "Wi-Fi Setup", set the
wireless LAN connection first, and you can set
LAPC function ( 41).
17
Connections (17)