Connecting to a system which controls rekordbox dj using DJ players
For connecting to DDJ-XP2,
be sure to use the supplied
USB cable for high level
performance.
This product satisfies electromagnetic noise regulations
when it is connected to other equipment through
shielded cables (with Ferrite-cores attached) and
connectors.
Use only the furnished accessory connecting cables.
Launching the system
First, you need to connect your PC/Mac to a DJ mixer compatible with rekordbox dvs.
• For detailed instructions on using the rekordbox dj software, rekordbox dvs plus pack and a DJ mixer compatible with rekordbox dvs, see their
respective operating instructions.
1 Connect a DJ mixer compatible with rekordbox dvs to your PC/Mac using a USB cable.
2 Connect the audio output of the analog player and the channel input of the DJ mixer using an audio cable
(RCA) (sold separately).
3 Set a Control Vinyl for rekordbox dvs made by Pioneer DJ (sold separately).
• Other vinyls can't be used.
4 Turn on your PC/Mac.
• The audio driver for the DJ mixer should be installed before starting rekordbox.
5 Turn on the analog player and DJ mixer.
6 Launch rekordbox.
You need to register an account to use rekordbox. For details on the registration, open [Support] on the rekordbox website below, click [Manual] and
read rekordbox Introduction.
rekordbox.com
– For Mac
In Finder, open the [Applications] folder, then double-click the [rekordbox 5] > [rekordbox.app] icon.
– For Windows 10
From the [Start] menu, click [Pioneer] > [rekordbox] icon.
– For Windows 8.1
From [Apps view], click the [rekordbox] icon.
– For Windows 7
In the Windows [Start] menu, open [All Programs] > [Pioneer] > [rekordbox 5.X.X] > [rekordbox].
DJ player
DJ mixer
CDJ-2000NXS2
DJM-900NXS2
etc.
etc.
D44-8-1-2b_A1_En
DDJ-XP2
USB cable (supplied)
USB cable
LAN cable
LAN cable
LAN cable
DJ player
CDJ-2000NXS2
etc.
The ferrite-cores are for the purpose of preventing
electromagnetic noise, do not remove them.
PC/Mac
Switching hub
D44-8-1-4_A1_En
9
En