Cleaning And Care; Descaling - Unold 18530 Notice D'utilisation

14. The kettle is fitted with a dry-operation cutout that switches off the heating
elements when they become too hot, for instance when the kettle has boiled
dry. Allow the kettle to cool down. Then fill the kettle with cold water. This
will reset the cutout so that the kettle can be used again.
15. Always use fresh and cold water. Do not leave water in the kettle.
16. Switch off and unplug electrical appliances after use.
Boiling water can cause scalding. Therefore, please
handle the appliance with care when it contains hot
water.
The appliance becomes very hot during operation
and maintains the heat during some time after
disconnection.

CLEANING AND CARE

1. Do not immerse the base, power cord or kettle in water or other liquids or
wash them in the dishwasher.
2. Wipe off the base and the kettle with a damp cloth and a little dishwash-
ing detergent. Do not use any abrasive scouring agents, steel wool, metal
objects, hot cleaning agents or disinfectants, since they can damage the
appliance.
3. The appliance must be completely dry on the outside before you use it
again.

DESCALING

20
Copyright UNOLD AG | www.unold.de
Before cleaning, always turn off the appliance
and unplug it from the power supply.
Allow the appliance to cool before cleaning it.
1. To keep the appliance operating efficiently and to
prolong its service life, it should be descaled regularly,
depending on the hardness of your water.
2. The lime scale filter has to be cleaned regularly. Please
empty the kettle completely and allow it to cool off. Care-
fully remove the filter from the pour spout. Clean the filter
carefully with a soft brush under running water. You can