Electronic Adjustment; Use Of Dishwasher Salt - ZANKER ZKV1530 Notice D'utilisation

1

Electronic adjustment

The water softener is set at the factory at level 5.
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold the programme selection/cancel
button.
4. Release the programme selection/cancel button
when programme indicator light A starts to flash
and programme indicator light B comes on.

Use of dishwasher salt

Caution! Only use dishwashers salt. Types of
salt that are not applicable for dishwashers cause
damage to the water softener.
1
24
2
Set switch to position 1 or
2.
2
5. Wait until programme indicator light B goes off.
– Programme indicator light A starts to flash.
– The end indicator light starts to flash.
6. Press the programme selection/cancel button one
time.
– Programme indicator light A starts to flash.
– The setting function of the water softener is ac-
tivated.
– The end indicator light flashes to show the level
of the water softener.
Example: 5 flashes, pause, 5 flashes, pause,
etc... = level 5.
7. Press the programme selection/cancel button one
time to increase the water softener level by one
step.
8. Press the on/off button to save the operation.
3
Fill the salt container with
1 litre of water (only the
first operation).
5
4
6