Setting The Time - SilverCrest Z31622A Instructions D'utilisation Et Consignes De Sécurité

he
y!
efore
There
stic
ies After you have inserted the batteries, the scale switches auto-
matically into the time mode
switched into the time mode
LC display
eries
There
ed
ely
anes.
y
ter
t .
4
Note: If you do not press another button within 60 seconds,
the set value stops to flash and the time is set.
cale.
91522_silv_Kuechenwaage_Content_GB_FI_SE_DK.indd 9
Insert 2 x 1.5 V
ment .
4
Note: Make sure you fit the batteries the right way round
(polarity). The correct polarity is shown inside the battery
compartment
4
Close the battery compartment
Setting the time (Fig. A)
. In this event, skip the next two steps.
1
If the scale is in the weighing mode, press and keep pressed
the MODE button
the time mode
5
Press and keep pressed the TARE button
3 seconds to set the time.
Press the MODE button
Press and keep pressed the MODE button
the value-setting process.
Press the TARE button
minute value flashes.
Press the MODE button
Press and keep pressed the MODE button
the value-setting process.
Press the TARE button
AAA batteries into the battery compart-
.
4
. As soon as the scale has
5
, the hour value flashes in the
5
for approx. 2 seconds to switch into
3
.
to set the desired hour value.
3
to confirm your setting. Then the
2
to set the desired minute value.
3
to confirm your setting.
2
.
for approx.
2
to speed up
3
to speed up
3
GB/IE 9
06.06.13 12:28