Rear Connections; Setting Up Your Evoke H6 - PURE Evoke H6 Mode D'emploi

Rear connections

12V DC 2.4A
Input for supplied
mains adapter only

Setting up your Evoke H6

To set up your Evoke H6:
1. Unclip the aerial and fully extend it.
2. Connect the supplied mains adapter to the input on the back of your Evoke H6.
3. Plug the mains adapter into the mains supply.
6
3.5mm output for
stereo headphones
– +
12V DC Aux in
Au x in
Analogue stereo
input for auxiliary
cables
+
–
12V DC
>
Micro USB
connector for
software updates
Aux in
– +
12V DC Aux in