Bosch PKS 16 Multi Notice Originale page 19

OBJ_BUCH-1837-005.book Page 19 Thursday, June 16, 2016 11:13 AM
10 Auxiliary gripping surface (insulated)
11 Handle (insulated gripping surface)
12 Spindle lock button
13 Mounting flange
14 Saw blade*
15 Clamping bolt with clamping flange
16 Hex key
17 Vacuum hose*
18 Set of screw clamps*
19 Cutting mark
20 Chip ejector
21 Diamond cutting disc*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Circular Saw
Article number
Rated power input
No-load speed
Base plate dimensions
Mounting bore
Weight according to EPTA-
Procedure 01:2014
Protection class
Cutting depth, max.
Saw blade diameter, max.
Saw blade diameter, min.
Blade thickness, max.
Tooth thickness/setting, max.
Tooth thickness/setting, min.
Max. diameter for diamond cutting
discs
Working with one diamond cutting
disc
– Cutting discs width, min.
– Cutting discs width, max.
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-5, EN 60745-2-22.
Typically the A-weighted noise levels of the product are:
Sound pressure level 97 dB(A); Sound power level
108 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2
Sawing wood: a <2.5 m/s , K=1.5 m/s
h
2
Sawing metal: a <2.5 m/s , K=1.5 m/s
h
2
Cutting tiles: a =2.5 m/s , K=1.5 m/s
h
Bosch Power Tools
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
PKS 16 Multi
PKS 1600 Multi
Declaration of Conformity
3 603 CB3 0..
We declare under our sole responsibility that the product de-
W 400
scribed under "Technical Data" is in conformity with all rele-
-1
vant provisions of the directives 2011/65/EU, 2014/30/EU,
min 6400
2006/42/EC including their amendments and complies with
mm 68 x 233
the following standards: EN 60745-1, EN 60745-2-5,
mm 15
EN 60745-2-22, EN 50581.
Technical file (2006/42/EC) at:
kg 1.9
Robert Bosch Power Tools GmbH, PT/ETM9,
/II
70538 Stuttgart, GERMANY
mm 16
Henk Becker
Executive Vice President
mm 65
Engineering
mm 65
mm 1.2
mm 2.0
mm 0.8
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
mm 65
Stuttgart, 01.01.2017
Assembly
mm 0.6
mm 1.2 Mounting/Replacing the Saw Blade
(for Sawing Applications)
 Before any work on the machine itself, pull the mains
plug.
 When mounting the saw blade, wear protective gloves.
Danger of injury when touching the saw blade.
 Only use saw blades that correspond with the charac-
teristic data given in the operating instructions.
 Do not under any circumstances use grinding discs as
the cutting tool.
 Release and close the base plate 3 carefully, in order to
avoid injury and material damage.
2
,
2
,
2
.
English | 19
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
1 609 92A 216 | (16.6.16)