Advice On Handling Cds - MC Crypt CDMP-68U DJ Notice D'emploi

15. Troubleshooting
The TRACK dial (3) does not select any tracks.
• The FOLDER function is on.
No playback can be started anymore after activating the SCRATCH function.
• The TRACK dial (3) does not select any tracks.
No sound audible.
• A device in the playback chain is not turned on.
• The wrong input was selected on the amplifier/mixer.
• The volume control of the amplifier/mixer or the power amplifier is turned to "MINIMUM".
One channel does not work.
• A cinch cable was disconnected from the audio output of the CD player or the amplifier/mixer input.
• The balance control was set wrongly on the amplifier/mixer.
• The RCA connection cable is defective.
No ID3 tag text displays are played.
• The MP3 files on the storage medium (CD, USB storage) include no ID3 tag text information.
• There are no MP3 files on the storage medium.
Repairs other than those described above must only be carried out by an authorised specialist.
No tracks are recognised when reading the USB drive. The display "SCAN" and "EMPTY" lights up in the
display.
• Hold down the TITLE button (19). Now use the dial TRACK (3) to select the right format for your USB drive.

16. Advice on Handling CDs

• Hold CDs at the edges only. This avoids fingerprints or dirt on the surface.
• Only touch CDs with clean hands.
• If one of your CDs is dirty, wipe it clean from the centre to the edge using a soft, lint-free cloth. Never clean
CDs in a circular motion. Never use any solvents.
• If the dirt cannot be removed easily, please use a standard CD cleaning agent (do not use a cleaning agent
for records) and observe the manufacturer's instructions.
• Do not write on your CDs and do not stick any labels etc. onto them. Labels might come off inside the CD
player and damage it.
• After playing your CDs, keep them in the provided CD cases.
• When storing CDs, do not expose them to direct sunlight, heat or moisture.
52