Setting The Equalizer; Eq7 - Sony CDX-M9900 Mode D'emploi

Setting the equalizer

— EQ7

You can select an equalizer curve for 7 music
types (Xplod, Vocal, Club, Jazz, NewAge, Rock,
and Custom).
You can adjust a different equalizer setting for
each source.
Selecting the equalizer curve
1
Press (SOURCE) to select a source
(radio, CD, MD or AUX).
2
Press (MENU).
3
Press < or , repeatedly to select
"Sound," then press (ENTER).
4
Press < or , repeatedly to select
"EQ7," then press (ENTER).
When changing the equalizer curve, select
"Select," then press (ENTER).
5
Press < or , repeatedly to select the
desired equalizer curve, then press
(ENTER).
6
Press (MENU).
The display returns to the normal display.
To cancel the equalizer curve, select "OFF," in
step 5.
Note
While DSO is activated, equalizer settings are
automatically adjusted for best overall effect.
36
Adjusting the selected equalizer curve
You can store and adjust the equalizer settings
for frequency and level.
1
Press (SOURCE) to select a source
(radio, CD, MD or AUX).
2
Press (MENU).
3
Press < or , repeatedly to select
"Sound," then press (ENTER).
4
Press < or , repeatedly to select
"EQ7," then press (ENTER).
5
Press < or , repeatedly to select
"Tune," then press (ENTER).
6
Adjust the equalizer curve.
1 Press < or , repeatedly to select
the desired frequency.
Each time you press < or ,, the
frequency changes as follows:
62Hz y 157Hz y 396Hz y
1000Hz y 2510kHz y 6340Hz y
16000Hz
2 Press M or m repeatedly to adjust
the level, then press (ENTER).
The level is adjustable in 1 dB steps from
–10 dB to +10 dB.
3 Repeat steps 1 and 2 to adjust all
the frequencies.
The confirmation display appears after
adjuting "16000Hz," then press (ENTER).
7
Press < or , to select "YES," then
press (ENTER).
"Complete" appears, then the display returns
to the main menu.
8
Press (MENU).
The display returns to the normal display.
To restore the factory preset, select "Initialize" in
step 5.