1. On/off switch
2.
Handle
3.
Cord
4.
Motor casing
5. Dust reservoir with filter
6. Stick
7. Knob for disconnecting the floor nozzle
8.
Floor nozzle
9. Knob for disconnecting the stick
10. Knob for disconnecting the dust reservoir
11. Crack nozzle
12. Brush nozzle
13. Suspension bracket
Follow these instructions when using the vacuum cleaner for the first time: Carefully remove the vacuum cleaner and all
accessories from the packaging and remove all packaging material. Keep the packaging (plastic bags and cardboard) out
of reach of children. After unpacking the appliance, carefully check it for external damage that may have occurred during
transport. Place the vacuum cleaner on a sturdy, dry and flat surface.
MOUNTING AND REMOVING THE FLOOR NOZZLE
Hold the connection of the floor nozzle in line with the connection of the stick and connect both parts in such a way that they
snap in place.
Press the knob on the tube to disconnect the floor nozzle - fig. 1.
MOUNTING AND REMOVING THE STICK
Hold the connection of the stick in line with the connection of the vacuum cleaner and connect both parts in such a way that
they snap in place - fig. 2. Press the knob to disconnect the vacuum cleaner again.
SWITCHING THE VACUUM CLEANER ON AND OFF
Press the on/off button
on the handle to switch on the vacuum cleaner.
Slide the on/off button back to switch off the vacuum cleaner and remove the plug from the socket.
USING THE VACUUM CLEANER AS A HANDHELD VACUUM CLEANER
The vacuum cleaner can also be used as a handheld vacuum cleaner, in order to clean furniture or car seats for instance.
Remove the stick - fig. 3 and place one of the accessories on the nozzle of the vacuum cleaner.
The handheld vacuum cleaner can be used with the floor nozzle, crack nozzle or brush nozzle.
Press the on/off button
on the handle to switch on the vacuum cleaner.
Slide the on/off button back to switch off the vacuum cleaner and remove the plug from the socket.
After each use, place the vacuum cleaner back on the suspension bracket.
PRODUCT DESCRIPTION
PRIOR TO FIRST USE
ASSEMBLY
USE
EN - 14