Care And Cleaning - Zanussi ZDT11001 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
Opening the door while the appliance operates
If you open the door, the appliance stops. When you close
the door, the appliance continues from the point of inter-
ruption.
Cancelling the programme
1. Open the appliance door.
2. Press and hold the programme button until the indi-
cator of the set programme goes off and the end indi-
cator flashes.
Make sure that there is detergent in the detergent
dispenser before you start a new programme.
At the end of the programme
When the programme is completed, an intermittent acous-
tic signal operates.

Care and cleaning

Warning!
Before maintenance, deactivate the appliance and discon-
nect the mains plug from the mains socket.
Dirty filters and clogged spray arms decrease the
washing results.
Make a check regularly and, if necessary, clean them.
Cleaning the filters
1
C
B
A
2
1. Open the appliance door.
• The end indicator is on.
2. Press the on/off button to deactivate the appliance.
3. Close the water tap.
• For better drying results, keep the appliance door ajar
for some minutes.
• Let the dishes become cold before you remove them
from the appliance. Hot dishes can be easily damaged.
• First remove the items from the lower basket, then from
the upper basket.
There can be water on the sides and on the door of
the appliance. Stainless steel becomes cool more
quickly than the dishes.
3
To remove filters (B B ) and
(C C ), turn the handle coun-
terclockwise and remove.
Pull apart filter (B B ) and
(C C ). Wash the filters with
water.
A
4
Remove filter (A A ). Wash
the filter with water.
21

Publicité

Table des Matières
loading

Table des Matières