Geberit AQUACLEAN MERA Instructions De Montage page 45

2
Reset the thermal cut-out of the storage
water heater.
3
Activate the shower procedure.
✓ The device initialises after switching on.
The status LED on the lateral control
panel flashes blue.
126100791724687115-1 © 04-2020
970.058.00.0(00)
4
Mount front cladding.
If the status LED flashes red:
• Switch off device, wait 30 seconds and
then switch device back on.
If the status LED continues to flash red
after taking these measures, contact
customer service.
EN
45