Geberit AQUACLEAN MERA Instructions De Montage page 46

EN
Testing additional functions of the
Comfort model
Prerequisite
– When the detection range is entered: The
orientation light switches on.
1
Test lid lifting function for steady and low-
noise motion.
✓ When the detection range is entered: The
WC lid opens.
✓ When the detection range is left: The WC
lid closes after 2 minutes if no users are
detected during this time.
2
Test heating function of the WC seat.
✓ The WC seat steadily becomes
noticeably warm to the touch.
3
Test storage water heater status at the
lateral control panel.
✓ The LED lights up when you enter the
detection range.
✓ The LED switches off when you leave the
detection range.
46
Testing the lid lifting function of
the remote control
The lid lifter can be activated with the <Shower>
button.
▶
Press the <Shower> button to activate the
lid lifter.
Result
✓ The WC lid opens fully. Pressing the <Shower>
button again closes the WC lid.
126100791724687115-1 © 04-2020
970.058.00.0(00)