Hendi Bain marie 2 x 1/1 Mode D'emploi page 6

Function
The bain-marie is ideally suited for keeping food at the right temperature.
The temperature is continuously adjustable from 30 °C to 85 °C
Safety instructions
Only connect the appliance to an earthed 230 VAC electrical socket.
Avoid overloading.
Turn off the appliance after use by unplugging the equipment from the mains supply.
Unplug the equipment from the mains supply before filling it with water or cleaning.
The electrical installation must satisfy the applicable national and local regulations.
Technical details
Supply voltage [U]
Power [P]
Dimensions (W x D x H)
Container
Installation
Remove the white protective foil from the stainless steel parts.
Only connect the appliance to an earthed 230 VAC electrical socket.
Use
Close the drain completely.
Fill the container with sufficient water to allow the empty trays to just float.
Install the trays.
Turn the switch to the desired temperature. The orange lamp will light and the water
will be heated.
When the set temperature is reached, the green lamp will light.
Note !
Check the water level regularly during use.
Bain marie 2 x 1/1
230/240 VAC
2400 W
845x645x900 mm
2 x GN 1/1 240mm diep
Bain marie 3 x 1/1
230/240 VAC
3600 W
1211x650x900 mm
3 x GN 1/1 240mm diep