Redmond RMC-M13A Manuel De L'utilisateur page 21

VII. BEFORE CONTACTING A SERVICE CENTER
Displayed Error Code
Е1–Е4
Problem
The unit does not switch on Voltage supply failure
Voltage supply interruption
There is a foreign object between the bowl and the heating element
The dish is taking too long to
cook
The bowl is not properly positioned
The heating element is dirty
The packaging, user manual and the device itself may not be treated as household waste. Instead, it shall be taken to the applicable collection point for the
recycling of electrical and electronic equipment.
© REDMOND. All rights reserved. 2015
Reproduction, transfer, distribution, translation or other reworking of this document or any part thereof without prior written permission of the legal
owner is prohibited.
Error Description
System error (possible control board or thermal sensors
malfunction); the lid is not closed properly
Possible Cause
RMC-M13A, RMC-M23A, RMC-M33A
Error Handling
Close the lid properly. If this does not eliminate the error, contact
an authorized service center
Solution
Check voltage supply
Check voltage supply
Remove the foreign object
Position the bowl properly
Unplug the device and let it cool down. Clean the heating element
ENG
21 21