Technical Characteristics; Preparation For Use; Preparing The Tube - Virax VULCA D63 Manuel D'utilisation

TECHNICAL CHARACTERISTICS

Voltage: 230 V AC /
Nominal power = 800 W
Frequency: 50/60 Hz
Working range: Ø 20-63 mm
Temperature range: max.. 330°C
Dimensions: 475 x 359 x 110 mm
Weights:
• VIRFUS D63 Thermostatic = 1.5 Kg
• G-clamp = 0.4 Kg.

PREPARATION FOR USE

This equipment leaves the factory completely finished
and ready to use; it needs no adjustment or
preparation for use.
OPERATING INSTRUCTIONS
Welding with this unit consists of three phases:
A.

preparing the tube

B. preparing the socket welding device
C. The welding process.
A) PREPARING THE TUBE
20
Cut the tube straight
across using a suitable
tool (pipe cutter or
cropper)
NOTE
The surfaces to be welded must be cleaned
immediately before welding. Protect the surfaces from
weather conditions.
B) PREPARING THE SOCKET WELDING
DEVICE
1) Mount the VIRFUS D63
Mounting using the G-clamp
The VIRFUS D63 is supplied with a G-clamp that can
be used to attach it firmly to a workbench.
• Introduce the top section of the G-clamp into
the slot in the bottom of the unit
Clean the surface to
be welded and the
adapters with
cellulose tissue
dampened with
ispopropanol
Mark the length of
the weld on the tube