Virax VULCA D63 Manuel D'utilisation page 22

2) Mount the correct adapters for the diameter
of the tube to be welded onto the heating
plate
• Locate the male and female adapter halves on each
side of the heating plate and bolt them to it using the
allen key supplied with the equipment
PRECAUTION
In order to mount the adapters onto the heating plate,
make sure that the plate is cold and that the unit is
unplugged
Fig 6 Mounting the adapters
22
3) Connect the unit to the power source
Check that the red power LED lights when the unit is
plugged in.
Fig 7 Power LED
4) Select the working temperature with the
regulator knob
• Turn the regulator knob to the working position
The thermostat-controlled model has 6 position for the
regulator knob (See Fig. 8).
0 Off
6 Working position
Fig 8 Regulator knob