Virax VULCA D63 Manuel D'utilisation page 21

Fig 2 Insert the adapters
• Mount the unit on the edge of the workbench and
tighten the screw of the G-clamp until the unit is firmly
held in place
Fig 3 Mounting using the G-clamp
Mounting without the G-clamp
Spread out the legs and rest the VIRFUS D63
on a flat surface, ensuring
that it is stable
Fig 4 Using the unit on its legs
PRECAUTION
The unit must not be connected to the mains supply
and used for welding whilst the G-clamp has not been
mounted. The legs can be used to position the unit
once it has been removed from the case, to mount the
adapters when cold, etc.
Fig 5 Safety
F
21