Measuring Conditions - PCE TLM 300 Manuel D'utilisation

D
Trapezoid function
GB
Angle function
Battery life,
F
Type AA, 2 x 1.5V
P I r t a n i g
I
E Dimension
Weight (with batteries)
P
Temperature range:
Storage
NL
Operating
DK
* maximum deviation occurs under unfavourable conditions
S
such as bright sunlight or when measuring to poorly
re ecting or very rough surfaces. For distances over 30 m the
maximum deviation may increase by ± 0.1 mm/m to a
N
maximum of ± 10 mm.
FIN

Measuring Conditions

J
Measuring Range
CN At night, at dusk and when the target is shadowed
the measuring range without target plate is
ROK
increased.
Use a target plate to increase the measurement
PL
range during daylight or if the target has a bad re ec-
tion.
HR
Measuring Surfaces
H
Measuring errors can occur when measuring toward
colourless liquids (e.g. wate
RUS
styrofoam or similar semi-permeable surfaces.
CZ
Appendix
GR
up to 10 000
measurements
P I 5 4
splash proof, dust proof
148 x 64 x 36 mm
~ 250 g
-25°C to +70°C
(-13°F to +158°F)
-10°C to +50°C
(-14°F to +122°F)
r) or dust free glass,
10
Aiming at high gloss surfaces de ects the laser beam
and measurement errors can occur.
Against non-re ective and dark surfaces the
measuring time can be increased.
Care
Do not immerse the unit in
a damp, soft cloth. Do not use aggressive cleaning
agents or solutions. Treat the optical surfaces with
the same care that you would apply to eyeglasses
and cameras.
Warranty
The Stanley TLM 300 comes with a two (2) year
warranty from Stanley. For more information on the
warranty please go to: www.pce-instruments.com/english
In case of any questions concerning the warranty
please contact the dealer who you purchased the
instrument from.
All illustrations, descriptio ns and technical speci ca-
tions are subject to chan ge without prior notice.
water. Wipe o dirt with
.
Stanley TLM 300 1.0.0 gb