Menu Functions - PCE TLM 300 Manuel D'utilisation

10 Storage of constant
11 Main line
12 Units with exponents (
13 Room angle
14 Hardware error
15 Indirect measurement - Pythagoras
16 Indirect measurement - Pythagoras - Trapezoid,
partial height
17 Three auxiliary lines (e.g. previous results)
18 Area / Volume
19 Offset setting
20 Battery indication

Menu functions

Presettings
The menu allows selection of the settings that will
remain in memory after the instrument is switched
off.
Navigation in the menu
Press the MENU -key {A, 9} repeatedly to scroll
through the possible menu functions (LIGHT, BEEP,
OFFSET, LASER, RESET).
When the desired menu option appears, select it with
the EQUAL - key {A, 8}, scroll through the possible
settings with the PLUS - key {A, 7} or the MINUS -
key {A, 12} and store the selected setting with the
EQUAL - key {A, 8}. Press CLEAR - key {A, 11} to
leave the menu without saving any changes in the
settings.
Stanley TLM 300 1.0.0 gb
2 3
/ ), Degree
Selecting Light - display illumina-
tion
Press MENU - key {A, 9} briefly to select desired
LIGHT setting.
Possible settings:
– OFF
– ON
– AUTO: ON for 15 seconds
The display illumination remains on for 15 sec-
onds after the last key press.
In permanent ON mode, the display illumina-
tion consumes more battery power.
Default setting: Display illumination AUTO.
Selecting Beep
Press MENU - key {A, 9} briefly to select desired
BEEP setting.
Possible settings:
– ON
– OFF
Default setting: BEEP ON.
3
D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
Menu functions
GR