Advice For Good Ironing; Declaration Of Conformity - Singer SNG 4.23 Instructions D'utilisation Et Consignes De Sécurité

Masquer les pouces

Table des Matières

Les langues disponibles

We recommend using the lowest temperatures with fabrics that

have unusual finishes (sequins, embroidery, flush, etc.).

If the fabric is mixed (e.g. 40 % cotton 60 % synthetics), set the

thermostat to the temperature of the fibre requiring the lower

temperature.

If you don't know the composition of the fabric, determine the suit-

able temperature by testing on a hidden corner of the garment.

Start with a low temperature and increase it gradually until it

reaches the ideal temperature.

Never iron areas with traces of perspiration or other marks: the

heat of the plate fixes the stains on the fabric, making them irre-

movable.

The size is more effective if you use a dry iron at a moderate tem-

perature: excess heat scorches it with the risk of forming a yellow

mark.

To avoid marking silk, woolen or synthetic garments shiny, iron

them inside out.

To avoid marking velvet garments shiny, iron in one direction

(following the fibre) and do not press down on the iron.

The heavier the washing machine is loaded, the more garments

come out creased. This also happens when the spin drying revolu-

tions are very high. Many fabrics are easier to iron if they are not

completely dry. For example, silk should always be ironed damp.

Meaning of crossed - out wheeled dustbin:

If electrical appliances are disposed of in landfills or dumps, haz-

ardous substances can leak into the groundwater and get into the

food chain, damaging your health and well-being.

When replacing old appliances with new ones, the retailer is legally

obligated to take back your old appliance for disposals at least

free of charge.

This appliance complies with the requirements of the relevant Euro-

pean and national guidelines. This is confirmed by the CE mark.

The relevant declarations are held by the manufacturer.

28 GB/IE/NI

311270_Singer_Buegeleisen_SNG4.23_content_DE_GB_IE_NI_FR_HU_CZ_SK.indd 28